It's Here ...
EZLogic Gen 3 ...
 The most advanced
zero-pressure accumulation system in the world. While featuring
the same EZLogic® familiarity, GEN3 incorporates new
technologies for ease of installation, operation, and
maintenance.
|
FEATURES
|
GEN3 FUNCTIONALITY
|
- Ease of Installation and Replacement
- Unprecedented Throughput Possibilities
- Expanded Control Options
- Greatly Simplifies Field Wiring
- Easy to Configure
- Functionality to Enhance Product Flow
|
- Two Modes of Operation
- Jam Protection
- "Sleep" Feature
- Loading Zone
- Indexing Zone Stop
- Cascading Slug Release
- Expandability
|
Call or email Babush for more information
about GEN3!
262-820-2500
Conveyor Speed:
The standard speed for most unit handling conveyors is 65 FPM
(Feet Per Minute). This is the average speed a person
walks when carrying a 50 lb. box. Other speeds, both faster and
slower than 65 FPM, are also available.
However, some facts should be pointed out when changing speeds:
- Horsepower ratings in the catalog and website are
calculated according to the standard speed listed for that
conveyor. When increasing the speed, more horsepower may be
needed. As a rule of thumb, it will take twice as much
horsepower to move a given package at 130 FPM than at 65
FPM. The formula below may help to determine the approximate
power requirements :
HORSEPOWER IN CHART
(based on 65
FPM) X DESIRED
SPEED( In feet per minute)
65
Example:
- Model TA, 11 ft long requires 1/2 Hp motor at 65 Feet
per minute for a total load of 320 pounds.
- You desire your conveyor to operate at 90 Feet Per
Minute.
- Calculate as follows: (1/2 X 90) / 65 = .69
- You should select the next highest horsepower or 3/4 Hp.
This formula may be used to give you a good estimate. Ask us
to do a complete horsepower calculation is you have any
concerns.
- The service life of a conveyor running at a higher speed
may be shortened considerably.
- Most conveyors are not designed to run over 200 FPM. When
they do, some parts may need to be balanced to prevent
excessive vibration, and special bearings may be required.
- The type of belting used on a conveyor may also need to be
considered.
- NOTE: Pallet handling conveyors generally operate at 30
FPM and 30 may be substituted in the denominator of the
formula.
For more information, contact Babush Material Handling
Systems.
Did
You Know...
Babush is your Single Source Solution Provider!
We can help increase your productivity and maintain your
installation and maintenance costs by providing you with the
most cost effective conveyor application for your needs as
well as the most modern programmable controllers available
today.
Babush has Online Ordering - All stock sizes and options!
   
Babush Material Handling Systems can provide you with a
variety of conveyors, supports, accessories, replacement
parts, and electrical controls. Our online shopping makes it
easy for you, our customer, to find exactly what you
need...you choose your model and options and we provide you
with the correct components.
Babush also has your ordering links to Maintenance Manuals,
Literature Requests, Warranty Information, Quote Requests, or
find out your Order Status. You can feel comfortable using our
secured shopping website!
Babush accepts Visa/MasterCard
Click here to order online today:
About Us
Babush Material Handling Systems
provides state of the art material handling services through
rapid development of new technologies and partnering programs.
With over 75 years in material handling integration, Babush is
positioned to provide you with the most cost effective
solutions, on time deliveries, and high quality customer care
for all of your material handling integration needs. Some of our
services include: Audits & Consulting, Layout &
Simulation, Project Management, Turnkey Installation,
Maintenance & Services, and more. Visit our website for more information
and to find out how Babush Material Handling Systems can become
your Single Source Solutions Provider!
|
